![]() This will be most important if you have found the stud, as it will make it easier for the screw to attach to the wood. If it sounds hollow, you’re knocking on drywall. While there is likely some metal used along these studs, you can also gently knock along the wall to verify a post is there. If you have trouble or do not want to purchase a stud finder, you can use a similar method mentioned in the previous section: measuring along the wall from your outlets. Use your stud finder to locate the posts. Having one in your home is helpful for hanging anything - from TVs to light fixtures and more. There are a lot of great stud finders on the market these days. Drywall TV Mountsĭrywall is the most common building material homeowners encounter when placing their TV. Keep in mind that when purchasing and using a MantelMount TV mount, they must be mounted to studs or a structural part of the wall and cannot be mounted to simply just drywall or plaster. If you are connecting your TV to a plaster wall without a stud, use a toggle or molly bolt, keeping in mind that a molly bolt can hold up to 50 pounds. Step 3: Secure the TV Wall Mount Using Lag, Toggle, or Molly Boltsįor anchoring to studs behind plaster and lath, use lag bolts. Plaster is very thick and can crack more easily, so be careful as you drill. ![]() If you cannot locate the stud, drill your initial holes where you want the TV to hang. Once you have located your studs, drill a pilot hole through the plaster and into the wood. ![]() You can use your magnet in this next area to verify the stud is there. Drag your magnet back and forth above the outlet box to determine if the stud is located to the left or right.įrom there, measure out 16-24 inches, as is typical of stud spacing in home construction, to determine where the next post is located. If you have trouble, locate your electrical outlets for the room. The magnet will be able to detect where nails were used to attach the wood lath to the studs. To locate studs behind plaster, you will need a strong magnet that you can drag along the wall to find them. While there are ways to hang a TV wall mount without a stud, we recommend fastening to a stud whenever possible to ensure it is the most secure. For plaster-brick walls, please refer to our article, “ How to Mount a TV on a Brick Wall. In this section, we will primarily address how to hang your system to plaster and lath. When you knock on the plaster, does it sound solid or hollow? Brick will sound more solid while lath will sound more hollow. To find this out, try knocking on the wall. This is critical to know so you use the right type of anchor. ![]() When you screw into a plaster wall, you could be hitting plaster, lath, and a stud, or plaster and brick. Sometimes plaster is placed over brick and sometimes it’s placed over lath (narrow boards hung horizontally over the studs). Plaster Wall TV Mountsīefore doing anything, understand what material was used to construct your home. Keep reading to learn how to locate the studs behind each wall, what to do if you don’t see them, and which anchors to use for a TV mount on plaster vs. hanging one over sheetrock are finding the studs. The biggest difference you’ll discover between mounting a TV on plaster walls vs. It is possible to anchor a TV wall mount to any type of surface you just need the right tools to ensure your system is installed properly and that your wall can handle the weight of your television. There are many reasons to install a TV in your home, or even on your covered patio, but if you’re unsure of how to secure such a heavy object to your wall, especially as surface treatments vary from home to home, this guide is for you.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |